RUSH PAR 1 RGBW
The RUSH PAR 1 RGBW is a bright LED PAR Can with premixed RGBW color mixing. It offers electronic dimming and strobe and comes with a flexible bracket for floor or truss mounting.
Features
- Bright LED PAR Can
- Premixed RGBW color mixing
- 17° one-tenth peak angle
- Electronic dimming and strobe
- Flexible bracket – floor or truss-mounted
- 5-pin XLR
Teech Specs
Physical
- Length: 260 mm (10.3 in.)
- Width: 195 mm (7.7 in.)
- Height: 293 mm (11.6 in.)
- Weight: 3.6 kg (8.0 lbs.)
Dynamic Effects
- Color mixing: RGBW
- Color selection: 32 color presets
- Electronic dimming: 0 - 100%
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic 'shutter' effect: Instant open and blackout
Control and Programming
- Control options: DMX, stand-alone
- DMX channels: 5/7
- Stand-alone trigger options: Music trig, auto trig
- White balance control: RGB adjustment
- DMX address setting: Control panel with LED display
- Stand-alone programming: Control panel with LED display
- Protocol: USITT DMX512/1990
Optics
- Light source: 7 x 10 W RGBW Cree MC-E LEDs
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions
Construction
- Housing: High-impact flame-retardant thermoplastic
- Color(s): Black
- Protection rating: IP20
Installation
- Mounting: Adjustable bracket, surface or truss mount
- Orientation: Any
- Location: Indoor use only
Connections
- AC power in/thru: Neutrik PowerCon
- DMX data in/thru: 5-pin XLR
Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Typical total power consumption: 78 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
- 110 V, 60 Hz: 1.1 A, 78 W
- 230 V, 50 Hz: 0.7 A, 78 W
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)
- Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 270 BTU/hr.
Approvals
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573 US EMC: 47 CFR Part 15 Class A
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
Included Items
Power cable 1.5 m
Mounting bracket
Accessories
Cables, 16 A, for connection to power in chains
Power input cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with
PowerCon input connector, 3 m (9.8 ft.): P/N 11541508
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with
PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with
PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511
Power connectors
Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805
Related Items
RUSH™ Software Uploader 1: P/N 91611399
Ordering Information
RUSH PAR 1 RGBW™ in cardboard box: P/N 90480000