RUSH Multibeam 2
- Название продукта
- RUSH Multibeam 2
- Производитель
- Martin
- Страна производства
- Бельгия
Features
- Powerful and intense multi-beam effect
- Two moveable bars with narrow long-throw beams
- 10 individually controllable 10 W RGBW LEDs
- Electronic dimming and variable strobe
- Master / slave function
- Preprogrammed macrosDMX or sound activated
- 3 & 5 pin XLR
Tech Specs
Physical
- Length: 473 mm (18.7 in.)
- Width: 248 mm (9.8 in.)
- Height: 164 mm (6.5 in.)
- Weight: 9.5 kg 21.0 lbs.)
Dynamic Effects
- Color mixing: RGBW
- Color selection: 32 color presets
- Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout
- Pre-programmed effects: 12 pre-programmed macros with adjustable speed
- Electronic dimming: 0 - 100%
Control and Programming
- Control options: DMX, stand-alone, master/slave
- DMX channels: 44
- Stand-alone trigger options: Music trig, auto trig
- Setting and addressing: Control panel with LCD display
- Protocol: USITT DMX512/1990
Optics
- Light source: 10 x 10 W RGBW Cree XM-L LEDs
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Beam angle: 8°
*Figure obtained under manufacturer's test conditions
Construction
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Protection rating: IP20
Installation
- Mounting points: Two quarter-turn brackets for rigging clamps
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 130 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Thermal
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)
- Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 450 BTU/hr.
Approvals
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573 US EMC: 47 CFR Part 15 Class
A Australia/NZ: C-TICK N4241
Included Items
Power cable 1.5 m
Accessories
Cables, 16 A, for connection to power in chains
Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon input connector, 3 m (9.8 ft.): P/N 11541508
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511
Power connectors
Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805
Installation hardware
Half-coupler clamp: P/N 91602005
G-clamp (suspension vertically downwards only): P/N 91602003
Quick-trigger clamp (suspension vertically downwards only): P/N 91602007
Related Items
RUSH™ Software Uploader 1: P/N 91611399
Ordering Information
RUSH Multibeam 2™ in cardboard box: P/N 90480030